Buffalo-technology PC-P1LAN Manual do Utilizador descarregar pdf (Página 17)

17Mini LinkTheater User’s Manual

Using LinkTheater

Detailed Conguration

Appendix

The startup screen is not displayed,

and the computer is not recognized by

LinkTheater

Cause (1):

The LAN cable is not connected

Solution (1):

Check that the LAN cable is connected to

both the computer and LinkTheater (push in

the LAN cable until you hear a “click”). After

connecting the LAN, switch the LinkTheater

power off and on again.

Cause (2):

The wrong cable is being used (when

connecting directly to a computer)

Solution (2):

You need to use a crossover cable when

connecting LinkTheater directly to a

computer. Connect with a crossover cable.

After connecting the cable to the LinkTheater

and to your LAN, switch the LinkTheater's

power off and then on again.

Cause (3):

The software that came with LinkTheater has

not been installed

Solution (3):

Insert the CD provided into the computer’s

CD drive, and click [Install PC-P1LAN Utility]

from easy setup.

Cause (4):

The BootServer is not running on your PC

Solution (4):

Check that the BootServer icon is

displayed in the task tray. If the icon is not

displayed, click [Start]-[(All) Programs]-

[BUFFALO]-[PC-P1LAN]-[PC-P1LAN

BootServer].

Cause (5):

There is a problem with the router or access

point

Solution (5):

If you have tried all of the above solutions

but LinkTheater is still not recognized on

the environment connected to your router or

access point, refer to [Read Me First] and

connect LinkTheater directly to the computer.

Cause (6):

The IP address is wrong

Solution (6):

Refer to “For customers that do not have

a router” (page 12) and check that the

computer IP address and LinkTheater

IP address have the rst three groups of

numbers the same, and the last group of

numbers different. For example, if the

LinkTheater IP address is [192.168.11.51],

check that the computer's IP address is

[192.168.11.61] or something similar. Subnet

masks should be the same for both.

Cause (7):

Software that contains a rewall is installed

Solution (7):

If a rewall is enabled, the computer may

not be recognised from LinkTheater. In this

case, you can disable the rewall function

or accept use of UDP ports [59821] [59823]

and TCP ports [8888] [9666] [9667] [58080]

[58001] [59824], or uninstall the software that

has rewall settings. Contact the software

maker for information about rewall settings.

The following is an example of how to

disable a rewall.

[When Trend Micro PC-Cillin 2003 is

installed]

Use the following procedure to disable the

[Personal rewall function].

1. Select [Start] - [(All) Programs] - [Trend

Micro PC-Cillin-2003] - [PC-Cillin-2003

operations].

2. When the [PC-Cillin-2003 operation screen]

starts, click on the [Professional] tab.

3. Click the [Emergency lock] button

displayed on the right side, check that

[Emergency lock is OFF] is displayed, and

click [OK].

4. Check that there is an x mark in the

[Wireless LAN mode] button. If there is no x

mark, click the [Wireless LAN mode] button

to switch the wireless LAN mode OFF.

When these settings are completed, close

the [PC-Cillin 2003 operation window].

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 23

Comentários a estes Manuais

Sem comentários