Buffalo Technology WLI-CB-AG108HP Manual do Utilizador

User ManualAirStation Dual A&GDraft-N Wireless Notebook AdapterWLI-CB-AG108HPv1.0

10• Click OK when Client Manager installation is complete.• Press Exit Setup to exit AirNavigator.• Client Manager is now installed and running in

11The AOSS button for this wireless client is in its Client Manager software. Start Client Manager by right clicking on the black antenna icon in your

12• From the Status Screen, select the Proles tab.• Initiate AOSS by clicking the blue AOSS button on the Client Manager’s screen. The AOSS wizard

13Once AOSS is complete (about 30 seconds), the connection is archived as a prole for later use. To minimize Client Manager to the system tray, click

14You may use Client Manager to congure your wireless network. Client Manager consists of the Status page, the Survey page, and the Proles page. You

15Client Manager Configuration• Network Type - Displays whether network is in Ad-Hoc or Infrastructure mode. • Rate – The speed of communication bet

16Click the Scan tab to open this page. Here, you can survey the area, display available access points, and connect to available access points.This pa

17This dialog will open for you to enter any necessary encryption information. The correct encryption type should already be selected automatically i

18Profiles PageClick the Proles tab to open this page. Use this page to access your proles. Proles allow you to save the information associated wit

19New Profile Dialog Box• Select Profile – Select whether the prole is for a wireless or wired connection.• Profile Name – Enter the name you want to

2Thanks for buying the WLI-CB-AG108HP Wireless CardBus Client. This wireless notebook adaptor lets you connect your notebook PC to wireless networks

20Advanced Profile Options• Network Tab – Displays the network information tab. A static IP can be specied for this wireless prole here. It is no

21Windows XP includes the Zero Conguration Service, a built in serrvice to congure your wireless clients from within Windows. Turn to page 7 if you

22• Click the Advanced tab to enter an SSID network name or WEP/WPA encryption key if necessary. To add an SSID network name that is not listed, cli

23• To congure a WEP/WPA encryption key, select the wireless network and click Congure.• From the pull down menu, select the Network Authenticatio

24Wireless Zero ConfigurationWireless Zero Configuration Service (Windows XP)Windows XP offers the Wireless Zero Conguration Service to support 802.1

25Antenna InformationThe WLI-CB-AG108HP includes built-in antennas that allow it to connect to 802.11a, 802.11b, or 802.11g networks. External antenn

26SpecificationsWireless LAN Interface Standards Compliance IEEE 802.11a IEEE 802.11g IEEE 802.11bCommunication Protocol

27Troubleshooting / FAQWhat should I do if I already have a version of Client Manager on my PC? Update your Client Manager to the version on the CD. I

2810BaseT or 100BaseTx: 802.3 based Eth-ernet network that uses UTP (Unshielded twisted pair) cable and a star topology. 10 is 10 Mbps and 100 is 10

29DNS (Domain Name System): System used to map readable machine names into IP addresses Driver: Software that interfaces a computer with a specic h

3Don’t insert the AirStation card into your computer’s cardbus slot yet. First, install the drivers:• Insert the AirNavigator CD into the CD-ROM dri

30Default Parameter: Parameter set by the manufacturer. Destination Address: The address portion of a packet that identies the intended recipient sta

31IEEE (Institute of Electrical and Electronics Engineers): The professional organization which promotes development of electronics technology. IP (

32LED (Light Emitting Diode): The lights on a hardware device representing the activity through the ports. MAC (Medium Access Control) Address: A un

33Ping (Packet Internet Groper): An Internet utility used to determine whether a particular IP address is online. Plug and Play: Hardware that, once

34Server: Any computer that makes les or peripheral devices available to users of the network and has a resident Network OS. SMTP (Simple Mail Trans

35UDP (User Datagram Protocol): A communication method (protocol) that offers a limited amount of service when messages are exchanged between compute

36Federal Communication Commission Interference StatementThis equipment has been tested and found to comply with the limits for a Class

37FCC RF Radiation Exposure Statement:This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This eq

38SafetyThis equipment is designed with the utmost care for the safety of those who install and use it. However, special attention must be paid to the

39EU countries not intended for useNonePotential restrictive useThis device is a 2.4 and 5 GHz wireless LAN transceiver, intended for indoor home and

4• Select Install Wireless Drivers. Installing Wireless Drivers

40Warranty InformationBuffalo products come with a 2-year limited warranty from the date of purchase. Buffalo Technology warrants products in good op

41Contact InformationNorth America (USA / Canada) ADDRESSBuffalo Technology (USA), Inc.4030 West Braker Lane, Suite 120Austin, TX 78759-5319GENERAL IN

42Contact InformationEurope ADDRESSBuffalo Technology UK LTD176, Buckingham Avenue,Slough, Berkshire, SL1 4RDUnited KingdomGENERAL INQUIRIESTel: +44 (

43At Buffalo Technology, we constantly update our software and rmware. For the most recent software, rmware, driver, and technical whitepaper relea

5• Click Next to install a driver for the CardBus.• Select Agree and click Next. • A window will appear prompting you to insert the Wireless CardBu

6• When the ‘Found New Hardware Wizard’ launches, click Next to run the wizard. • If the ‘Digital Signature Not Found’ page opens, click Yes.• When

7Connecting Wireless Clients to your NetworkBuffalo supports three different methods for connecting your wireless client device to your network.If you

8Client Manager can be used to survey and connect to available access points, congure WPA/WEP encryption, and create connection proles.Note: When Cl

9Client Manager• Once the Client Manager Installer launches, click Next.• Press Agree to accept the license agreement and continue installation.